Figure 3-21. Mounting The Backplate - AT&T MERLIN LEGEND Release 2.0 Installation Section

Installing Telephones and Adjuncts

Figure 3-21. Mounting the Backplate

f . Plug the free end of the cord into the jack labeled LINE on the
back of the telephone. Route the cord through the cord channel
above the jack. See Figure 3-7 earlier in this chapter.
Position the telephone on the mounting plate studs and then
slide the telephone down to lock it in place. To remove the
telephone, slide it up and off.
3-42
Assembling the MLX Telephone
Jack Guard
6 3 0 B
Phone
Mount
Jack Plug
Mounting Plate