Setting Up The Central Site - Lucent Technologies MERLIN LEGEND Reporter Installation And Use Manual

Central Site of a Multi-site Configuration

Setting Up the Central Site

The Central Site is set up as documented in Chapter 2. Sample screens will look like
they are shown in Part I of this book, with the exception noted below:
Some dialog boxes will show the
name of the site on its title bar.
At first, it reads "Default." This will be
changed in the next few steps:
1. Select Site Maintenance from the Utilities menu.
2. When a dialog box similar to the one below appears, proceed as follows:
a. Select Edit.
b. Change the site name from "Default" to the one you wish to appear on reports.
c. Select [x] Central Site.
d. Select Apply to accept the changes, then Close to exit.
Issue 1 January 1997
8-3