Checking The Equipment - Lucent Technologies MERLIN LEGEND Reporter Installation And Use Manual

Installation

Checking the Equipment

Verify that the following equipment is in place and properly set up, as documented in its
installation manuals (see the Required Configuration table for equipment specifications).
MERLIN
LEGEND
Remote
Access
Modem
Required
Configuration
486 class / 25 MHz speed
Processor
8 Mb RAM
5 Mb for the application software
(1)
Storage
80 Mb for data (25,000 call records)
A COM port available
(2)
Serial Ports
input at all times
and Modems
See Serial Port
An additional COM port available
Pinouts and
Modems in
during Remote Access
appendix C.
A 9600-baud (or faster) modem for
Remote Access
Bus, PS/2, or serial mouse (a serial mouse may cause IRQ conflicts. See
Devices
Appendix E for information on IRQ conflicts and solutions), VGA color monitor,
parallel printer
Windows 3.1 or Windows for Workgroups 3.11 or Windows 95 (if PC is on a
Software
LAN, MERLIN LEGEND Reporter will require special installation.)
Issue 1 January 1997
2-2
Keyboard
Single-site
(3)
for SMDR
(4)
(5)
(must support graphics and 10-17 characters/inch)
Graphics
Monitor
Mouse
Multi-site
486 class / 66 MHz speed
8 Mb RAM
5 Mb for the application software
200 Mb for data (62,500 call records)
A COM port available
all times
A 1200-baud (or faster) modem for
SMDR input
An additional COM port available
(3)
Remote Access
A 9600-baud (or faster) modem for
(4)
Remote Access
Parallel
Printer
(3)
for SMDR input at
(3)
during