Using Remote Access - Lucent Technologies MERLIN LEGEND Reporter Installation And Use Manual

Getting Assistance for Problems

Using Remote Access

1. To enable Remote Access:
a. Make certain your Remote Access modem is ready and on-line.
b. Open the Carbon Copy program group, and double-click on the Host icon.
c. When the Carbon Copy Host main menu appears, click on the Wait for Call
button.
The Host - Waiting for Call icon appears at the bottom of
your screen, indicating that your PC is ready for access:
2. To disable Remote Access:
a. Click on the Waiting for Call icon at the bottom of your screen.
b. When the Carbon Copy Host main menu appears, minimize (click on the top,
right corner) or close it (double-click on the top, left corner).
Subsequent callers will not be able to connect with your PC until you re-start Carbon
Copy Host or select Waiting for Call from the Carbon Copy main menu.
Make certain to disable Remote Access as soon as the technician has
finished with the remote access session. This ensures that your PC is
!
accessible via Carbon Copy only at your request.
D-2
Issue 1 January 1997