Lucent Technologies MERLIN LEGEND Reporter Installation And Use Manual page 24

Installation
4. Follow the screen instructions to:
a. Register your name (required) and your company.
b. Skip viewing the README.TXT with the No button.
c. Accept the default directory (c:\microcom) for installation.
d. Accept the default installation options (Carbon Copy Host).
5. Screen instructions will prompt you to install Disk #2 and Disk #3. (Disk #4 is not
used with the above options.)
As configuration checks are carried out, you may be prompted to replace
existing drivers and/or older Carbon Copy files. Choose Yes to replace them.
6. The Modem Wizard dialog box appears.
a. To have it detect and configure your modem, select Yes, then OK. Follow
instructions when other verification dialog boxes appear, then proceed to step 7.
b. To configure your modem manually, select No and proceed as follows:
i. When the Communications dialog box appears, select Serial Port then the
Setup button.
ii. When the Serial Port Setup dialog box appears, select the Port, Modem, and
Speed used (see Appendix C for modem specifications). If your modem is
not listed, select AT Compatible.
iii. Select Test to check the connection. (If it fails, verify port settings and
repeat.)
iv. Select OK to continue.
7. Select No if prompted to convert password tables or modify the autoexec.bat file.
Select Yes to save suggested changes in an autoexec.ccw file.
8. When the Setup program concludes,
Select OK to acknowledge the message.
Issue 1 January 1997
2-6
Skip in a minimal setup
it informs you that Windows will restart.