Location Table - Lucent Technologies MERLIN LEGEND Reporter Installation And Use Manual

System Management

Location Table

Purpose To identify the called area in Organization, Selection, and Account Code Detail
Reports, as well as the ICLID Call Distribution Report. Up to 5000 entries are allowed.
Dialog
Box
Summary of Procedures (Location Table )
1. From the Customize menu, select Location Table.
2. To add a new pattern, select Add; for changes, select the desired pattern and use
Edit or Delete, as appropriate.
3. For additions or edits, complete the dialog box, then select Apply (Reset cancels
changes). You may work with another entry or select Close to exit.
4. We suggest you print a Location Table Listing (under Customization Listings
in the Listings menu). For example:
Date: Friday, October 27, 1995
Time: 10:51:22 AM
--------------------------------------------------------------------------------
End of Location Table Listing
Location Table Listing
DIALING PATTERN LOCATION
------------------ ----------
657???? Holcomb
533???? Patterson
964???? Madison
878???? Basset
Dialing Pattern. Up to 10 digits and/or wild
cards (? = single digit; % = multiple digits).
Do not use toll codes (1 or 011) for long
distance or international calls as part of the
dialing pattern.
Location Name. Up to 10 characters for the
name of this area.
International Dialing Pattern. Select [x] if
this pattern is associated with international
calls.
Company Name
DIALING PATTERN
------------------
732????
728????
653????
Issue 1 January 1997
See Site
Selection in
Chapter 8.
Page: 1
LOCATION
----------
Waverly
Somerset
Airfield
3-23