Ir Control Switching - Barco CLM HD8 R9050130 User Manual

Image 13-29
Image 13-32
6. Press EXIT to return.

13.5 IR control switching

What can be done?
Each IR receiver inside the projector can be activated or deactivated. When an IR receiver is deactivated, no IR signal send to this
IR receiver will be processed. When entering an Activation code with the remote control all IR receivers can be activated at the
same time.
How to switch
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Projector control and press ENTER.
3. Use the ▲ or ▼ key to select IR Control and press ENTER.
4. Use the ▲ or ▼ key to select the desired IR receiver and press ENTER to toggle this receiver [on] or [off].
Image 13-33
Activation key
1. Use the ▲ or ▼ key to select Activation key and press ENTER.
The Activation key window opens. The first digit is selected.
2. Enter a new value with the digit buttons. The next digit is selected. Or use ◄ or ► key to select another digit.
3. Press ENTER to activate the key.
R59770057 CLM HD8 15/03/2010
Image 13-30
Image 13-34
Image 13-31
Image 13-35
13. Projector control
143