Table of Contents
Advertisement
3. Use the ▲ or ▼ key to select Gamma and press ENTER.
The Gamma progress bar appears.
4. Use ◄ or ► key to change the gamma setting and press EXIT.
Gamma can be set to one of the 8 available steps.
Image 12-22
12.8 Internal pattern
What can be done with these patterns?
The projector is equipped with different internal patterns which can be used for measurement and alignment purposes.
How to select?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Alignment and press ENTER.
3. Use the ▲ or ▼ key to select Internal patterns and press ENTER.
The internal patterns menu is displayed.
4. Use the ▲ or ▼ key to scroll through the possible selection and press ENTER to activate the selected pattern.
Select ▲ or ▼ in the menu to display the previous or next page with possible internal patterns.
Image 12-25
R59770057 CLM HD8 15/03/2010
Image 12-23
Image 12-26
Image 12-24
Image 12-27
12. Alignment menu
121
Advertisement
Table of Contents
