Table of Contents
Advertisement
Image 13-41
13.6.2 DMX universe
About DMX universe
One DMX universe can contain a limited number of projectors depending on the DMX mode. Only 512 channels can be connected
to one universe. When the number of channels exceed the universe space, a new universe has to be created
How to set the DMX universe
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Projector control and press ENTER.
3. Use the ▲ or ▼ key to select DMX and press ENTER.
4. Use the ▲ or ▼ key to select DMX universe and press ENTER.
The edit DMX universe window opens.
5. Use the ▲ or ▼ key to select a new value
Or,
enter a new value with the digit keys on the remote control or local keypad.
6. Use the ◄ or ► key to select the next digit and repeat step 5.
7. When the desired universe is entered, press ENTER to store that universe.
Image 13-42
Image 13-45
13.6.3 DMX monitor
What can be done?
If a DMX device is connected, the settings per channel can be displayed in an on screen menu.
How to start up the monitoring
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Projector control and press ENTER.
3. Use the ▲ or ▼ key to select DMX and press ENTER.
4. Use the ▲ or ▼ key to select DMX monitor and press ENTER.
R59770057 CLM HD8 15/03/2010
Image 13-43
Image 13-44
13. Projector control
145
Advertisement
Table of Contents
