Status And Run Time Overview Lamps; Lamp Mode - Barco CLM HD8 R9050130 User Manual

11. Lamp menu

11.5 Status and run time overview lamps

Overview
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Lamp and press ENTER.
3. Use the ▲ or ▼ key to select Overview and press ENTER.
The status and the run time for each lamp are displayed.
Image 11-11

11.6 Lamp mode

What can be done?
In 4 lamps mode, the projector will always ignite all 4 lamps.
In 2 lamps mode, the projector will always ignite lamp 1 & 3 or 2 & 4 depending on the current run time. It will always use those with
the lowest run time.
In 1 lamp mode, the projector will always ignite lamp 3 or 4, depending on the current run time. It will always use the lamp with the
lowest run time.
How to change the lamp mode
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Lamp and press ENTER.
3. Use the ▲ or ▼ key to select Lamp mode and press ENTER.
The Lamp mode selection menu is displayed.
4. Use the ▲ or ▼ key to select the desired lamp mode and press ENTER.
Image 11-14
114
Image 11-12
Image 11-15
Image 11-13
Image 11-16
R59770057 CLM HD8 15/03/2010