Removal Of A Lamp Unit - Barco CLM HD8 R9050130 User Manual

Image 16-5
Slide out lens

16.5 Removal of a lamp unit

W
ARNING
C
AUTION
pressure, the lamp may explode in either hot or cold states if improperly handled. For recycling guidelines,
see "Recycling guidelines", page 8.
About the lamps
The projector contains 4 lamps, each of them in a separate lamp house. Each lamp can be individually replaced by a spare lamp.
Each lamp position has a number. That number is also used in the software to identify the parameters of the corresponding lamp.
Image 16-6
Lamp position
When servicing a projector with exploded lamp
Keep the following warning in mind when servicing a projector with exploded lamp.
R59770057 CLM HD8 15/03/2010
A
:
This procedure may only be performed by qualified technical service personnel.
:
Never attempt to disassemble the lamp from its housing or to dispose of it. Due to its high internal
Lamp 2
Lamp 1
Lamp 4
Lamp 3
16. Servicing
173