Sliderbox Position - Barco BarcoiQ GRAPHICS 500 Owner's Manual

Image 12-8

12.7 Sliderbox position

What can be done ?
The sliderbox can be displayed anywhere on the screen, the position can be set in this menu.
How to reposition the sliderbox?
1. Press MENU to activate the Tool bar
2. Press → to select the Display setup item
3. Press ↓ to Pull down the Display setup menu
4. Use ↑ or ↓ to select Sliderbox position (image 12-9)
5. Press ENTER
A sliderbox is displayed. Use the 4 arrow keys to drag the box to the desired position. (image 12-10)
Image 12-9
Image 12-10
There is a coarse and a fine adjustment of the position, use ENTER (when sliderbox is displayed) to switch
between the two.
R5976367 BARCOIQ GRAPHICS 500 01/02/2007
12. Display setup
111