Filmmode Detection - Barco BarcoiQ GRAPHICS 500 Owner's Manual

4. Use ↑ or ↓ to select Color temperature
5. Press → to pull down the menu
6. Use ↓ or ↑ to select the desired preset color temperature
7. Press ENTER
The color temperature of the image is adapted and a white bullet shows the active setting.
How to start up the custom color temperature ?
1. Press MENU to activate the Tool bar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select Color temperature
5. Press → to pull down the menu
6. Use ↓ or ↑ to select custom
7. Press ENTER
A slider box for the red custom setting is displayed as well as a wizard text box in the lower part of the screen. (image 7-18,
image 7-19)
Follow the instructions on the wizard textbox. (image 7-20)
Image 7-18
Image 7-19
Image 7-20
7.6

Filmmode detection

What can be done ?
Some sources like common DVD material are derived from cinema 24 Hz sources (2/2 or 3/2 pull down method).
R5976367 BARCOIQ GRAPHICS 500 01/02/2007
7. Image Menu
67