Change Password - Barco BarcoiQ GRAPHICS 500 Owner's Manual

A dialog box is displayed
8. Enter your PIN code
The security mode is now disabled

13.9 Change password

How to change the password ?
1. Press MENU to activate the Tool bar
2. Press → to select the Installation item
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Change password (image 13-17)
5. Press ENTER
A dialog box is displayed.
(image 13-18)
6. Use ← or → , the numeric keys on the remote , or the keypad to enter and confirm the new password.
Each character is displayed as an asterisk.
Image 13-17
Image 13-18
The new password is accepted if the new password and the confirmed password coincide.
If the password is forgotten contact a Barco authorized technician.
R5976367 BARCOIQ GRAPHICS 500 01/02/2007
13. Installation menu
123