Keys Sound; Dpms Mode - Barco Coronis Fusion 10MP User Manual

Keys sound

A
BOUT THE KEYS SOUND
By default, the keys will make a "beep" sound on every touch. However,
this sound can be disabled so that no sound will be heard when using
the keys.
T /
O ENABLE DISABLE THE KEYS SOUND
Bring up the OSD main menu.
1
Navigate to the Configuration > User Interface > Controls menu.
2
Enter the Sound submenu.
3
Select Enabled/Disabled as desired and confirm.
4

DPMS mode

A DPMS
BOUT MODE
Enabling the Display Power Management System (DPMS) mode on your
display will optimize its diagnostic lifetime by automatically switching
off the backlight when the display is not used for a specified period of
time. By default, DPMS mode is enabled on your display, but it also
needs to be activated on your workstation. To do this, go to the "Power
options properties" window of your workstation.
Barco recommends setting DPMS activation after 20 minutes of
non-usage.
T /
O ENABLE DISABLE
Bring up the OSD main menu.
1
Navigate to the Configuration > Power Management menu.
2
Enter the DPMS Mode submenu.
3
Select Enabled/Disabled as desired and confirm.
4
Coronis Fusion 10MP
30
:
DPMS
MODE ON YOUR DISPLAY
: