Keys Indicator Lights; Power Lock Function - Barco Coronis Fusion 10MP User Manual

Keys indicator lights

A
BOUT THE KEYS INDICATOR LIGHTS
By default, after lighting up, the keys indicator lights will dim again if no
further actions are taken within the following 5 seconds. However, this
behavior can be changed so that the keys indicator lights are always on
or always off.
T
O CONFIGURE THE KEYS INDICATOR LIGHTS
Bring up the OSD main menu.
1
Navigate to the Configuration > User Interface > Indicator Lights
2
menu.
Enter the Keys submenu.
3
Select Automatic/Always On/Always Off as desired and confirm.
4

Power lock function

A
BOUT THE POWER LOCK FUNCTION
By enabling the power lock function, the C
forced to remain switched on. This means that it can't be switched to
stand-by mode until the power lock function is disabled again.
T /
O ENABLE DISABLE THE POWER LOCK FUNCTION
Bring up the OSD main menu.
1
Navigate to the Configuration > User Interface > Controls menu.
2
Enter the Power Lock submenu.
3
Select Enabled/Disabled as desired and confirm.
4
:
F 10MP display is
ORONIS USION
:
Coronis Fusion 10MP
29