Connecting The Signal Cables - Barco Coronis Fusion 10MP User Manual

Connecting the signal cables

Connect one head of the display controller to the DVI 1 or
1
DisplayPort 1 connector with one of the supplied DVI or DisplayPort
cables.
Connect another head of the display controller to the DVI 2 or
2
DisplayPort 2 connector with one of the supplied DVI or DisplayPort
cables.
Each side of your display can have a different video input
connected (one side can have DVI connected while the
other side has DisplayPort connected). Both display sides
can have the same video input connected as well but
only one video input is allowed on each side of your
display.
If you want to make use of your display's USB downstream
3
connectors, connect a PC USB downstream connector to the
display's USB upstream connector by means of the supplied USB
2.0 cable.
Coronis Fusion 10MP
15