Front Menu User Keys; Input Signal Name - Barco MDSC-8527 Series User Manual

Advanced operation
The available profiles to save in your display are:
• User 1
• User 2
• User 3
To save a profile
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the Save Profile submenu.
4. Select one of the available profiles to save and confirm.

4.4.6 Front menu user keys

About front menu user keys
The MDSC-8527 has a front menu (see
user keys allow to immediately activate a commonly used function without having to access and browse the
OSD menus. Each user key is customizable and can have any of the following functions associated to it:
Main source
Brightness
Color space
DVI
SDI
HDMI 1
HDMI 2
DP
4K-SDI
Gamma
Image flip
PiP mode
Profile
(*) 12GP version only.
When a function is not available for the current display configuration, it will be visible with a grey
background.
To customize the front menu user keys
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the User Key 1/2/3 submenu.
4. Select one of the available user key functions and confirm.

4.4.7 Input signal name

About input source name
This function allows to define a name for each input source.
36 R5914634 /01 MDSC-8527
"Front menu ", page 21) which supports 3 user key functions. These
(sub-menu)
(slide bar)
(sub-menu)
(direct selection)
(direct selection)
(direct selection)
(direct selection)
(direct selection)
(direct selection) (*)
(direct selection)
(ON/OFF)
(ON/OFF)
(sub-menu)