Luminance Target; Viewing Modes - Barco Coronis Fusion 10MP User Manual

Luminance target

A
BOUT THE LUMINANCE TARGET
The luminance target of your C
over a predefined range. When you change the luminance target, the
display will adjust its backlight to reach the target.
T
O SET THE LUMINANCE TARGET
Bring up the OSD main menu.
1
Navigate to the Configuration > Calibration menu.
2
Enter the Luminance Target submenu.
3
Set a luminance target value as desired and confirm.
4

Viewing modes

A
BOUT VIEWING MODES
The C F 10MP display can be used in two viewing modes:
ORONIS USION
Diagnostic
Text
T
O SELECT A VIEWING MODE
Bring up the OSD main menu.
1
Navigate to the Configuration > Calibration menu.
2
Enter the Viewing Mode submenu.
3
Select Diagnostic/Text as desired and confirm.
4
F 10MP display is adjustable
ORONIS USION
:
This mode provides the full calibrated
luminance and is intended for using the
display for diagnostic purposes.
In this mode, the luminance is reduced to
approximately half of the luminance. This is
intended for using the display with office
applications such as word processing.
:
Coronis Fusion 10MP
31