Setting And Using The Oven Programmer/Timer; Selecting Manual Operation Mode; Setting The Time Of Day - Baumatic BT3062SS User Manual

Setting and using the oven programmer/timer

Selecting manual operation mode

After your appliance is connected to your mains supply for the first
time, the "A" symbol and numbers on the timer display will flash.
Before you can use the appliance, you must set your machine into
"manual operation" mode.
o To select manual operation mode, press the "manual operation"
button on the oven programmer/timer.

Setting the time of day

After setting your oven for manual operation, you should also set the
time of day.
o Press the "manual operation" button and "end cook" button
simultaneously.
o Immediately use the "minus" and "plus" buttons to adjust the
time that is shown on the timer/programmer display.
o After getting the display to the correct time, release the "minus"
and "plus" buttons. The "A" symbol will switch off and the
"manual operation" symbol will light.
IMPORTANT: If there is a power cut, then you will need to
put the appliance in manual operation mode and set the
time of day again.
14