Installation - Baumatic BBCSZ150GL User Manual

Single zone beverage centre
Table of Contents

Advertisement

Installation

IMPORTANT: Before installation and usage read
all the instructions and make sure that the
voltage (V) and the frequency (Hz) indicated on
the rating plate are exactly the same as the
voltage and frequency in your home. The rating
plate can be found on the front left edge of the
inside of the wine cabinet.
The manufacturer declines all responsibility in the event of the installer
failing to observe all the accident prevention regulations
which are necessary for normal use and the regular operation of the
electric system.
Electrical connection
YOUR BEVERAGE CENTRE IS INTENDED FOR FITTED
AND PERMANENT INSTALLATION.
"We recommend that the appliance is connected by a
qualified electrician, who is registered on the E.W.R.B. web site
and who will comply
Regulations
and
Your beverage centre comes supplied with a 10 amp moulded lead
with
an AS/NZS 3112 approved plug.
The wiring in the mains lead is coloured as follows:
o Brown Live
o Blue Neutral
o Green and yellow Earth
As the colours of the wires in the appliance's mains lead may not
correspond with the coloured markings identifying the terminals in
your spur box, please proceed as follows:
o The brown wire must be connected to the terminal marked
"L" (live), or coloured red.
o The blue wire must be connected to the terminal marked
"N" (neutral), or coloured black.
o The green and yellow wire must be connected to the terminal
marked "E" (earth), or by the earth symbol, or coloured green and
yellow.
When the connection is completed, no stray strands or cut wire should
be present. The cord clamp must be secured over the outer sheath."
with
the
AS/NZS 3000
local regulations.
in
force,
Wiring
7
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bbcsz150ss

Table of Contents