Table of Contents
Advertisement
You can find the ATI FireGL V5200 driver in EasyBUILD 7.1 build 600.
2.
Please insert the EasyBUILD 7.1 build 600 into the optical drive.
Expand Drivers -> Altos G5450 -> Graphics adapters -> ATI FireGL V5200,
3.
select Windows Server 2003 and click on Setup.
Follow the instruction to install the VGA driver.
4.
Please reboot the server after the driver is installed.
5.
After the system rebooted, you will see the following message on the
6.
screen.
Please right-click on desktop and select Properties.
7.
Select Setting tab, Change the setting of Display to 1. Plug and Play
8.
Monitor and ATI FireGL V5200 and click on Advanced.
Select Troubleshoot tab, change the setting of the Hardware acceleration
9.
to Full and apply the setting. You will not see the message again.
Checking the Device Manager, you would see ATI FireGL V5200 and ATI
10.
FireGL V5200 Secondary listed in Display adapters in Device Manager.
After you install the driver for ATI FireGL V5200, please also install the
11.
27
Altos G5450 Installation Configuration Guide
Advertisement
Table of Contents
