Table of Contents
Advertisement
Altos G5450 Installation Configuration Guide
Drivers Required
For SUSE Linux Enterprise Server 10 Installation, the following device drivers are
required.
Device
LSI MegaRAID SAS
8204ELP
Onboard NVIDIA
NFP3600 Chipset
Onboard NVIDIA
nForce Networking
Controller
Onboard XGI Z9s
ATI FireGL V5200
Software Required
The management utility of LSI MegaRAID SAS 8204ELP can be found in the
EasyBUILD 7.1 build 600 (or later).
Software
MegaRAID Storage
Manager
Configuring LSI MegaRAID SAS 8204ELP
Please refer to the Appendix C. for the LSI MegaRAID SAS 8204ELP
configuration.
Installation Tips
Since SUSE Linux Enterprise Server 10 cannot recognize the LSI MegaRAID
1.
SAS 8204ELP, you need to make a driver diskette from the EasyBUILD 7.1
build 600 first before the installation.
Boot the system form SUSE Linux Enterprise Server 10 disk1 bootable CD.
2.
When you see the boot menu on the screen, press F5 and select Yes.
3.
Press Enter to continue the installation.
4.
Insert the driver disk to the floppy, select fd0: Floppy and OK to load the
5.
LSI MegaRAID SAS 8204ELP driver from the driver diskette.
After loading the driver, select OK and Back to return to the installation.
6.
If you have installed the ATI FireGL V5200 in the system, you need to
7.
install addition packages during the OS installation. If you are using
onboard XGI Z9s, please go to step 13 directly.
At Installation Setting, select the Software.
8.
Check C/C++ Compiler and Tools under Development to add C/C++
9.
compiler tools.
88
Version
Directory on EasyBUILD
07.15.0209.20
\Disk\g5450\sas\8204elp\sles10\
07
N/A
OS built-in
0.60
\Disk\g5450\nic\Nvidia\sles10\
N/A
OS built-in
8.35.5
N/A
Version
Directory on EasyBUILD
2.07-00
\app\g5450\sas\8708ELP\Linux\
Advertisement
Table of Contents
