Altos G5450 Installation Configuration Guide
Drivers Required
For Windows XP Installation, the following device drivers are required.
Device
Onboard SATA
RAID
Onboard NVIDIA
NFP3600 Chipset
Onboard NVIDIA
nForce Networking
Controller
Onboard XGI Z9s
ATI FireGL V5200
Software Required
The management utility for onboard SATA RAID and NIC can be found in the
EasyBUILD 7.1 build 600 (or later).
Software
Onboard SATA
RAID utility
ForceWare Network
Access Manager
Configuring onboard SATA RAID
Please refer to the Appendix A. for the onboard SATA RAID configuration.
Installation Tips
As Windows XP can't recognize the onboard SATA RAID, you need to
1.
make a driver diskette from the EasyBUILD 7.1 build 600 first before the
installation.
Press F6 at the beginning of installation for providing the driver diskette
2.
for the onboard SATA RAID.
You will see NVIDA RAID CLASS Driver (required) and NVIDIA nForce
3.
Storage Controller (required) listed. Please select both of them to install.
After loading the onboard SATA RAID driver from the diskette, follow the
4.
normal procedure to finish the installation.
Chipset Driver Package Installation
The chipset driver installation is the same as LSI MegaRAID SAS 8708ELP
installed. Please refer to the Windows XP Professional Edition SP2 Installation
(with LSI MegaRAID SAS 8708ELP) Chipset Driver Installation section.
Gigabit Ethernet Driver Installation
The Gigabit Ethernet driver is included in the chipset driver package. The
64
Version
Directory on EasyBUILD
5.10.2600.687
\Disk\g5450\onboard\sataraid\wsxp\
Package 9.21
\Disk\g5450\onboard\Chipset\wsxp\
65.3.1.0
Including in chipset driver package
9.21
6.14.10.1080
\Disk\g5450\onboard\xgiz9s\wsxp\
8.323.1.0
\Disk\g5450\graphic\V5200\wsxp\
Version
Directory on EasyBUILD
5.10.2600.68
Including in chipset driver package
7
9.21
65.31
Including in chipset driver package
9.21