Onboard Gigabit
Ethernet
Onboard VGA
ATI FireGL V5600
Software Required
The management utility for onboard SATA RAID and NIC can be found in the
EasyBUILD 8.0 build 200 (or later).
Software
Onboard SATA
RAID Utility
ForceWare Network
Access Manager
Configuring onboard SATA RAID
Please refer to the Appendix A. for the onboard SATA RAID configuration.
Installation Tips
Though Windows Server can recognize the onboard SATA RAID, we still
1.
replace the driver with the one in EasyBUILD. Please make the driver
diskette from the EasyBUILD 8.0 build 200 first before the installation.
Please boot the system form the Windows Server 2008 x64 CD/DVD.
2.
Follow the instructions to do the installation.
When you see the "Where do you want to install Windows?" on the
3.
screen, please insert the driver diskette and click on Load Driver.
Click on OK. You will see the NVIDIA nForce RAID Controller
4.
(A:\nvrd64.inf), NVIDIA nForce RAID Device (A:\nvrd64.inf) and NVIDIA
nForce Serial ATA Controller (A:\nvrd64.inf) listed.
Please hold the ctrl key to select all of listed driver and click on Next to
5.
load the driver.
After the driver is loaded and returned to "Where do you want to install
6.
Windows?" page, click on Next to continue the installation.
Follow the instructions to finish the installation.
7.
Chipset Driver Installation
Please refer to the Windows Server 2008 Enterprise x64 Edition (LSI MegaRAID
SAS 8708ELP) Chipset Driver Installation section.
Gigabit Ethernet Driver Installation
The Gigabit Ethernet driver is included in the chipset driver package. The
Gigabit Ethernet driver will be installed automatically when you installing the
chipset driver package.
15
67.80.0.0
EasyBUILD 8.0 build 200 (or later)
6.14.10.1090
EasyBUILD 8.0 build 200 (or later)
8.440.0.0
EasyBUILD 8.0 build 200 (or later)
Version
Directory on EasyBUILD
EasyBUILD 8.0 build 10.3.51.1 200 (or
10.3.51.1
later)
67.80.0.0
EasyBUILD 8.0 build 200 (or later)
Altos G5450 Installation Configuration Guide