Gigabit Ethernet Driver Installation; Vga Driver Installation (Onboard Xgi Z9S); Vga Driver Installation (Ati Firegl V5200); Raid Utility Installation - Acer Altos G5450 Installation & Configuration Manual

Hide thumbs Also See for Altos G5450:
Table of Contents

Advertisement

Please select the fd0 as the Driver Disk Source.
3.
Follow the instruction to load the onboard SATA RAID driver from the
4.
driver diskette.
At the Package Installation Defaults, select Customize software packages
5.
to be installed.
At the Package Group Selection step, select Graphic Internet under
6.
Applications.
If you have installed the ATI FireGL V5200 in the system, please also select
7.
Development Tools and under Development. If you don't have ATI FireGL
V5200, please go to next step directly
After adding the additional packages, follow the normal procedure to
8.
finish the installation.

Gigabit Ethernet Driver Installation

The Gigabit Ethernet driver installation is the same as LSI MegaRAID SAS
8708ELP installed. Please refer to the Red Hat Enterprise Linux 4.0 Update 4
Installation (with LSI MegaRAID SAS 8708ELP) Gigabit Ethernet Driver
Installation section.

VGA Driver Installation (onboard XGI Z9s)

The XGI Z9s driver installation is the same as LSI MegaRAID SAS 8708ELP
installed. Please refer to the Red Hat Enterprise Linux 4.0 EM64T Update 4
Installation (with LSI MegaRAID SAS 8708ELP) XGI Z9s Driver Installation
section.

VGA Driver Installation (ATI FireGL V5200)

The ATI FireGL V5200 driver installation is the same as LSI MegaRAID SAS
8708ELP installed. Please refer to the Red Hat Enterprise Linux 4.0 Update 4
Installation (with LSI MegaRAID SAS 8708ELP) ATI FireGL V5200 Driver
Installation section.

RAID Utility Installation

NOTE. You need the firefox to use the onboard SATA RAID utility. You need to
select the Graphic Internet to install during the OS installation or you need to
install the Firefox manually.
You can find the onboard SATA RIAD utility in EasyBUILD 7.1 build 600.
1.
Please refer to Directory on EasyBUILD in Software Required section for
the utility and copy it from the EasyBUILD 7.1 build 600 to HDD first.
# mount /media/cdrom
# cp –R /media/cdrom/app/g5450/onboard/sataraid/Linux/RHEL4U4
/NvRaid-UI-9-22.i686.rpm /tmp
Install onboard SATA RAID utility
2.
77
Altos G5450 Installation Configuration Guide

Advertisement

Table of Contents
loading

Table of Contents