Table of Contents
Advertisement
Altos G5450 Installation Configuration Guide
Windows XP Professional x64 Edition SP2 Installation (with LSI
MegaRAID SAS 8708ELP)
Below information describes how to manually install Windows XP Professional
x64 Edition on Altos G5450 with LSI MegaRAID SAS 8708ELP installed.
Drivers Required
For Windows XP x64 Installation, the following device drivers are required.
Device
LSI MegaRAID SAS
8708ELP
Onboard NVIDIA
NFP3600 Chipset
Onboard NVIDIA
nForce Networking
Controller
Onboard XGI Z9s
ATI FireGL V5200
Software Required
The management utility for LSI MegaRAID SAS 8708ELP and NIC can be found
in the EasyBUILD 7.1 build 600 (or later).
Software
MegaRAID Storage
Manager
ForceWare Network
Access Manager
Configuring LSI MegaRAID SAS 8708ELP
Please refer to the Appendix B. for the LSI MegaRAID SAS 8708ELP
configuration.
Installation Tips
As Windows XP x64 can't recognize the LSI MegaRAID SAS 8708ELP, you
1.
need to make a driver diskette from the EasyBUILD 7.1 build 600 first
before the installation.
Press F6 at the beginning of installation for providing the driver diskette
2.
for the LSI MegaRAID SAS 8708ELP.
Select "LSI Logic MegaRAID SAS RAID Controller Driver (Windows XP-64)"
3.
as target driver
After loading the RAID driver from diskette, follow the normal procedure
4.
to finish the installation.
52
Version
Directory on EasyBUILD
2.7.0.64
\Disk\g5450\sas\8708elp\x64\wsxp
Package 9.18
\Disk\g5450\onboard\Chipset\x64\wsxp
\
65.2.0.0
Including in chipset driver package
9.18
6.14.10.1080
\Disk\g5450\onboard\xgiz9s\x64\wsxp\
8.323.1.0
\Disk\g5450\graphic\V5200\x64\wsxp\
Version
Directory on EasyBUILD
2.07-00
\app\g5450\sas\8204ELP\Windows\
65.16
Including in chipset driver package
9.18
Advertisement
Table of Contents
