2.6 Information about the CO Line Cards
2.6.3
T1 Card (KX-TDA0187)
Function
1-port T1 CO line card. EIA/TIA standard compliant.
LEDs
RJ45
To NT1
Accessories and User-supplied Items
Accessories (included): none
User-supplied (not included): RJ45 connector
Notes
•
Connect this optional service card to the CO line through NT1; do not connect to the CO line
directly.
•
T1 Card must be installed behind an FCC registered and UL or CSA-NRTL listed CSU.
•
To confirm the CO line connection, refer to "Confirming the CO Line Connection" in "2.14.1 Starting
the Hybrid IP-PBX".
CAUTION
T1 ports are SELV ports and should only be connected to SELV services.
Switch Settings
Switch
A/B
128
Installation Manual
Type
Usage and Status Definition
Slide
Keep the switch at default A position. Do not change the position of this
switch.