Installation Of Basic System Or 2-Shelf System (Floor Standing) - Panasonic KX-TDA600 - Hybrid IP PBX Control Unit Max. 1008 Ports Installation Manual

2.2 Installation of the Hybrid IP-PBX
2.2.5 Installation of Basic System or 2-shelf System (Floor
Standing)
The Hybrid IP-PBX can be expanded to a 2-shelf system by mounting an Expansion Shelf on the Basic
Shelf.
Construction of Basic System or 2-shelf System
2-shelf
System
Notes
• Make sure to remove the front cover from each shelf before installing the shelves (refer to "2.2.3
Opening/Closing the Front Cover").
• Do not install any optional service cards or a PSU in the shelves before installation.
• Do not block the openings of the shelf. Allow space of at least 10 cm (4 in) at the sides of the shelf,
and 20 cm (8 in) above the top-mounted shelf.
• Make sure that the surface behind the shelf is flat and free of obstacles, so that the openings on
the back of the shelf will not be blocked.
• Make sure that the surface behind the shelf is not made of wood.
• Be careful not to drop the shelf.
50 Installation Manual
Basic
System
Expansion Shelf 1
Metal Bracket
Basic Shelf
Metal Bracket