For an Expansion Shelf
Indication
Color
RUN
Green
ALARM
Red
Confirming the CO Line Connection
After initialization, program the Hybrid IP-PBX and connect CO lines to the Hybrid IP-PBX.
To confirm that the CO lines are successfully connected, dial [ ] [3] [7] + CO line number (3 digits) on a PT,
or press the PT's S-CO button. You will hear a dial tone if the CO line is available and connected.
Description
Expansion shelf status indication
•
OFF: Power Off (includes normal reset)
•
ON: Power On and running (on-line)
•
Flashing (60 times per minute): Starting up
•
Flashing (120 times per minute): Program error in the BUS-S card
Alarm indication
•
OFF: Normal
•
ON: Alarm (CPU stop, alarm for each optional service card
installed in Expansion Shelves)
2.14 Starting the Hybrid IP-PBX
Installation Manual
207