Panasonic KX-TDA600 - Hybrid IP PBX Control Unit Max. 1008 Ports Installation Manual page 137

Editing the CS Name using the KX-TDA600 Maintenance Console
While programming the Hybrid IP-PBX, we strongly recommend that you input a unique recognizable CS
name (maximum 20 characters) for each CS port in use, and "(Reserved)" or "(Not for CSIF4)" for unused
ports or unavailable ports respectively for the following reasons:
a.
you will be able to easily distinguish installed CSs.
b.
you will be able to know which CSIF card has been installed; CSIF4 or CSIF8.
Example: When the CSIF4 card has been installed
Pin Assignments
RJ45 Connector
No.
1-2
8
3
4
1
5
6
7-8
*1 The contents and design of the software are subject to change without notice.
Signal Name
Reserved
D1
POWH
POWL
D2
Reserved
2.7 Information about the Extension Cards
*1
Function
–
Data port (High)
Power (High)
Power (Low)
Data port (Low)
–
Installation Manual 137