Panasonic KX-TDA600 - Hybrid IP PBX Control Unit Max. 1008 Ports Installation Manual page 67

3.
Install 4 anchor plugs in the wall, using the wall brackets as a template. Fix the wall brackets to the wall
with 4 screws (A).
CAUTION
• Drive mounting screws into the wall. Be careful to avoid touching any metal laths, wire laths or
metal plates in the wall.
• When installing anchor plugs in the wall, be careful not to damage or dirty the shelves.
Wall Bracket (Left)
Washer
Screw (A)
Wall Bracket (Right)
Anchor Plug
413 mm
(16-1/4 in)
W a ll
2.2 Installation of the Hybrid IP-PBX
Hammer
Anchor Plug
(1-3/16 in)
Screw (A)
Washer
Wall Bracket
Installation Manual
8 mm
(5/16 in)
30 mm
67