Fastening Amphenol Connector - Panasonic KX-TDA600 - Hybrid IP PBX Control Unit Max. 1008 Ports Installation Manual

2.2.15 Fastening Amphenol Connector

An Amphenol 57JE-type connector is used on some of the optional service cards.
To connect an Amphenol connector, use the spring latch or screw to fix the upper part and use Velcro tape
to fix the lower part of the connector.
Spring
Latch
Velcro
Tape
1
2
Velcro
Tape
1
Spring
Latch
2
1
Insert the screw (included
with the Amphenol or
optional service card).
2
2.2 Installation of the Hybrid IP-PBX
Remove the
screw on the
optional service
card.
Installation Manual
®
113