T1 Card (Kx-Tda0187) - Panasonic KX-TDE200 Installation Manual

3.5.6 T1 Card (KX-TDA0187)

3.5.6 T1 Card (KX-TDA0187)
Function
1-port T1 trunk card. EIA/TIA standard compliant.
LEDs
RJ45
To NT1 / Extension
Accessories and User-supplied Items
Accessories (included): Ferrite core ´ 1
User-supplied (not included): RJ45 connector
CAUTION
•
When connecting this optional service card to the trunk, connect through NT1; do not connect to the
trunk directly.
•
T1 ports are SELV ports and should only be connected to SELV services.
Notice
When connecting the RJ45 connector, attach the included ferrite core (except in Canada, where the ferrite
core is not necessarily required). Refer to "3.2.9 Attaching a Ferrite Core".
Note
•
This optional service card can be used for either trunk or extension connection, by setting the A/B
switch or using the connector with appropriate pin assignments.
•
To confirm the trunk connection, refer to "Confirming the Trunk Connection" in "3.13.1 Starting the
PBX".
Switch Settings
Switch
A/B
98 Installation Manual
Type Usage and Status Definition
Slide Select A (default) for trunk or B for extension use.