Configuring Acl Binding - 3Com 2924-PWR User Manual

84 C 4: M
HAPTER ANAGING
Configuring ACL
Binding
D S
EVICE ECURITY
The ACL Binding Setup Page allows the network administrator to bind
specific ports to MAC- or IP-based ACLs.
The monitor user has no access to this page.
To define ACL Binding:
1 Click Device > ACL > ACL Binding > Setup. The ACL Binding Setup
Page opens:
Figure 36 ACL Binding Setup Page
The ACL Binding Setup Page contains the following fields:
Select Port(s) — Selects the ports to be configured.
■
Bind ACL — Assigns an Access Control List to a port or LAG.
■
MAC-based ACL — Displays the MAC based ACL to which the
■
interface is assigned.
IP-based ACL — Displays the IP based ACL to which the interface is
■
assigned.
Select ACL — Selects the ACL from a list of previously defined Access
■
Control Lists to which the port or LAG can be bound. To bind an ACL
to a LAG, the ACL should be bound to its port members.
2 Define the relevant fields.
3 Click . ACL Binding is defined, and the device is updated.