Table of Contents
Advertisement
6. CHANGING AUTOMATIC ENERGY SAVE TIME/ AUTOMATIC SHUTOFF TIME
1
Press the PROGRAM key to enter the
Program menu.
2
Press the Next key on the PROGRAM
panel to display the panel on the right.
To change the Automatic Energy Save time
1
Press the ENERGY SAVE key on the panel
show n at the top.
. The display on the right appears.
2
Select the desired number on the panel.
To change the Automatic Shutoff time
1
Press the AUTO SHUTOFF key on the
panel show n at the top.
. The panel on the right appears.
2
Select the desired number on the panel.
To exit from the Automatic Energy Save mode
. Press the ENERGY SAVE key or the START
key.
. The copier starts w arm ing up, then it becom es
ready after a short w hile.
. Using the Auto Job Start m ode is convenient.
See page 17.
To exit from the Automatic Shutoff mode
1
Turn the pow er sw itch ON.
. The copier starts w arm ing up, then the
m essage READY appears after approx.
7 m inutes. See page 16.
. Using the Auto Job Start m ode is convenient.
See page 17.
104
Downloaded from:
http://www.usersmanualguide.com/
Advertisement
Table of Contents
