Setting The User Programs; Toner Cartridge Life - Sharp AR-M160 Service Manual

Program
Program name
Use close paper size
Default tray setting
Default exposure mode
USB2.0 mode switch

2. Setting the user programs

1) Hold down the [Light] key (
( , , , , ) blink.
•"- -" appears in the display.
1 3 5
2) Enter the program number with the numeric keys.
•See "USER PROGRAMS" for the program numbers.
•The selected program number blinks.
•To select "Auto clear timer", press the [1] key.
Note: If you enter the wrong number, press the [CLEAR] key (
then enter the correct number.
3) Press the [START] key ( ).
•The selected program number stops blinking and lights steadily.
•The currently selected setting code blinks in the 1st digit of the
display.
START
4) Enter the desired setting code by pressing a numeric key.
•For the setting codes, see "USER PROGRAMS".
•The selected setting code blinks.
•To select 90 seconds, press the [5] key.
Note: If you enter the wrong number, press the [CLEAR] key (
return to step 2).
No
When this function is enabled, printing in printer mode will
automatically continue using a different size of paper if the specified
30
size of paper runs out in all trays. This feature does not function in
copy mode.
Use this program to select a default tray. This tray is automatically
selected each time the power is turned on or each time the machine
reverts to the initial settings.
31
Use this program to set "AUTO", "TEXT", or "PHOTO" as the default
exposure mode.
32
33 Used to switch USB2.0 mode between Full-Speed and High-Speed.
) until the alarm indicators
RE D END
AR-M205 USER PROGRAMS 8-3
Description
5) Press the [START] key (
•The selected setting code stops blinking and lights steadily.
Note: To select a setting for another user program, press the [CLEAR]
key ( ) and then return o step 2).
6) Press the [Light] key (
•The alarm indicators (
returns to the number of copies display.

3. Toner cartridge life

To find out the approximate quantity of toner remaining, follow the
procedure below.
1) Press and hold the light key for more than 5 seconds until all the
alarm indicators (
) and
the copy quantity display.
2) Press and hold the copy ratio display key for more than 5 seconds.
•The approximate quantity of toner remaining will be indicated as a
percent in the copy quantity display. ("100", "75", "50", "25", "10" or
"LO" is displayed. When "LO" is displayed, the toner is down to less
than 10%.)
3) Press the light key.
•All the alarm indicators will go out.
) and
Default Parameters
0 (OFF)
1 (ON)
OFF
1 (Tray 1)
2 (Tray 2)
Tray 1 3 (Tray 3)
4 (Tray 4)
5 (Bypass tray)
1 (AUTO)
AUTO 2 (TEEXT)
3 (PHOTO)
Full-Speed 1(Full-Speed)
2(High-Speed)
).
START
) to complete the settings.
, , , , ) go off and the display
, , , , and ) blink and "--" appears in