Copying From The Document Glass - Sharp AR-505 Operation Manual

COPYING FROM THE DOCUMENT GLASS

Use the document glass for copying single originals,
bound documents, and other originals that cannot be set
in the RSPF.
Only 1-sided to 1-sided and 1-sided to 2-sided
copying can be selected when copying from the
document glass.
Duplex copying will not work when a non-standard
sized paper (or 5-1/2" x 8-1/2" paper) is used.
2-sided to 2-sided or 2-sided to 1-sided copying
cannot be selected when copying from the
document glass. These operations can, however,
be performed simply by turning over the original
manually.
Original size detector
Centring scale
READY TO COPY.
1. A4
2. A3
AUTO AUTO A4
EXPOSURE PAPER SELECT
2-8
1-sided copies of 1-sided originals
Open the document feeder cover and place an original
1
face down on the document glass, using the centring
scale to position it.
When copying multi-page documents, copy from the first page
to the last page. When copying onto special paper placed on the
bypass tray, however, copy from the last page to the first page
because copies will be delivered face up.
If the copier is in the SORT or GROUP mode, copies will be
delivered face down unless the bypass tray is used to feed
special paper. If the copier is not in the SORT or GROUP mode,
copies will be delivered face up.
NOTE:
Do not place objects under the original size detector, because they
may damage it.
Close the document feeder cover.
2
The original size will be indicated on the touch panel, and the paper
tray with the corresponding paper size will be automatically selected.
Ensure that the 1-sided to 1-sided copying mode is
3
selected on the touch panel.
A4
ORIGINAL
When no icon is displayed in the area indicated in the illustration
106~200 g /m (
2
If the 1-sided to 1-sided mode is not selected, press the
2-SIDED COPY key and then press the 1-sided to 1-sided key
(
basic screen.
100%
COPY RATIO
If the orientation of the original does not match that
of the copy paper when both the original and copy
paper are of standard sizes and the auto paper
select mode or automatic copy ratio select mode is
on, the image of the original will be automatically
rotated to match the copy paper. If enlargement
copying onto a paper size larger than A4 (8-1/2" x
11") is performed and in case of 100% copying onto
a paper size larger than B4 (8-1/2" x 14"), however,
the image will not be rotated.
Image void (max. 5 mm (13/64")) can occur along
the leading and trailing edges of the copies. Also
image void (max. 5 mm (13/64") in total) can occur
along the other edges of the copies.
), the 1-sided to 1-sided copying mode is selected.
) on the touch panel. Press the "OK" key to return to the