Tftp Commands Set; Table 3.14: Tftp Commands Set; Systemlog, Smtp And Event; Table 3.15: Syslog,Smtp,Event Commands Set - Advantech EKI-7657C User Manual

8021x system accountport
[port ID]
8021x system sharedkey
[ID]
8021x system nasid
[words]
8021x misc quietperiod
[sec.]
8021x misc txperiod
[sec.]
8021x misc supptimeout [sec.]
8021x misc servertimeout
8021x misc maxrequest [number]
8021x misc reauthperiod
8021x portstate
[disable | reject | accept | authorize]
show 8021x
no 8021x
3.1.14

TFTP Commands Set

Table 3.14: TFTP Commands Set

Netstar Commands
backup flash:backup_cfg
restore flash:restore_cfg
upgrade flash:upgrade_fw
3.1.15

SystemLog, SMTP and Event

Table 3.15: SysLog,SMTP,Event Commands Set

Netstar Commands
systemlog ip
[IP address]
EKI-7657C _Manual_ed1
change the radius server port
Use the 802.1x system account
port global configuration command
G
to change the accounting port
Use the 802.1x system share key
global configuration command to
G
change the shared key value.
Use the 802.1x system nasid
global configuration command to
G
change the NAS ID
Use the 802.1x misc quiet period
global configuration command to
G
specify the quiet period value of
the switch.
Use the 802.1x misc TX period
global configuration command to
G
set the TX period.
Use the 802.1x misc supp timeout
global configuration command to
G
set the supplicant timeout.
Use the 802.1x misc server
[sec.]
timeout global configuration
G
command to set the server
timeout.
Use the 802.1x misc max request
global configuration command to
G
set the MAX requests.
Use the 802.1x misc reauth period
[sec.]
global configuration command to
G
set the reauth period.
Use the 802.1x port state interface
configuration command to set the
I
state of the selected port.
Displays a summary of the 802.1x
E
properties and also the port sates.
Disable 802.1x function
G
Level
Save configuration to TFTP and need
to specify the IP of TFTP server and
G
the file name of image.
Get configuration from TFTP server
and need to specify the IP of TFTP
G
server and the file name of image.
Upgrade firmware by TFTP and need
to specify the IP of TFTP server and
G
the file name of image.
Level
Set System log server IP address.
G
switch(config)# 8021x system accountport 1813
switch(config)# 8021x system sharedkey 123456
switch(config)# 8021x system nasid test1
switch(config)# 8021x misc quietperiod 10
switch(config)# 8021x misc txperiod 5
switch(config)# 8021x misc supptimeout 20
switch(config)#8021x misc servertimeout 20
switch(config)# 8021x misc maxrequest 3
switch(config)# 8021x misc reauthperiod 3000
switch(config)#interface fastethernet 3
switch(config-if)#8021x portstate accept
switch>show 8021x
switch(config)#no 8021x
Description
switch(config)#backup flash:backup_cfg
switch(config)#restore flash:restore_cfg
switch(config)#upgrade flash:upgrade_fw
Description
switch(config)# systemlog ip 192.168.1.100
36
Defaults Example
Example