Assign An Ip Address - Dell 5110cn - Color Laser Printer User Manual

Print and Check the Printer Settings Page
Print a Printer Settings page to verify the network connection. This page also provides important information
that helps you configure for network printing.
1. Press Menu.
2. Press until Report/List appears, and then press
3. Printer Setting is displayed. Press
The Printer Settings page is printed.
4. If the IP address shows anything other than 0.0.0.0 (the factory default) or 169.254.xx.xx, the printer
has an IP address assigned and stored. Go to

Assign an IP Address

NOTE: When you assign an IP address manually in IPv6 Mode, use the Dell Printer Configuration
Web Tool. To open the Dell Printer Configuration Web Tool, use the link local address. (To check
a link local address, see
An IP address is a unique number that consists of four sections that are delimited by a period and can
include up to three digits in each section, for example, 111.222.33.44.
Assigning an IP address already in use can cause network performance issues.
NOTE: Assigning an IP address is considered as an advanced function and is normally done by a
system administrator.
For more information on using your operator panel, see
1. Turn on the printer.
The Ready to Print appears.
2. Press Menu.
3. Press until Admin Menu appears, and then press
4. Press until Wired Network or Wireless Net appears, and then press
5. Press until TCP/IP appears, and then press
6.
.
"Verify the IP
"Print and Check the Printer Settings
or .
Settings."
Page".)
"Operator Panel."
or .
or .
or .