Dell 5110cn - Color Laser Printer User Manual page 44

FTP Password
Connection Time-Out
IP Filter Access List
2
(IPv4)*
Subnet Mask
Operation
*1 An optional multi protocol card is required to use.
*2 This item is only available for LPD or Port9100.
NetWare
Purpose:
To configure detailed settings for IPX/SPX and NetWare.
Values:
IPX/SPX Frame
Settings Type
Current Frame Type
Network Address
NetWare Device Name*
Active
Mode
Sets whether to enable or disable the password. And also
specifies the password value up to seven characters.
Sets the connection timeout period from 1 to 1000 seconds.
Enter the IP address which is added to the IP filter list.
Enter the subnet mask.
Select from Disable, Permit, or Reject. Selecting Disable
deactivates the IP filter function. However, selecting Permit (or
Reject) allows (or blocks) the network access from the IP
addresses registered on the IP filter list.
Auto Specifies the active frame type automatically.
Ethernet II Selects Ethernet II frame type.
Ethernet Selects IEEE802.3 frame type.
802.3
Ethernet Selects IEEE802.2 frame type.
802.2
Ethernet Selects SNAP frame type.
SNAP
Displays the current frame type.
Displays the IPX network address.
1
Specifies the printer name up to 47 alphanumeric characters.
For PServer Mode, set the Print Server Name (Print Server Object
Name). The original setting remains valid if no input is made.
Bindery: Selects this option when using Bindery: PServer Mode.
PServer
Mode