Dell 5110cn - Color Laser Printer User Manual page 159

Adobe Protocol
Purpose:
To specify PostScript communication protocol for each interface. You can configure Adobe Protocol settings
for Network. The change becomes effective after the printer is turned off and then on again.
Values:
Used when auto-detecting the PostScript communication protocol.
Auto*
Used when the communication protocol is in ASCII interface.
Standard
Used when the communication protocol is in binary format.
BCP
Used when the communication protocol supports both ASCII and binary data to switch between
TBCP
them according to the specified control code.
Used when no special processing is required.
Binary
Wireless Net
Use the Wireless Net menu to change printer settings affecting jobs sent to the printer through a wireless
network.
NOTE: The Wireless Net menu is only displayed when an optional multi protocol card is installed on
the printer and the optional wireless printer adapter is installed on the card.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Status
Purpose:
To display the information on the wireless signal strength. Any change cannot be made on the operator
panel to improve the status of the wireless connection.
Values: