Dell 5110cn - Color Laser Printer User Manual page 40

1
Ethernet* Ethernet
Settings
Current Ethernet Settings Displays the current settings of Ethernet.
MAC Address
Port LPD
Settings
Port9100
2
IPP*
WSD
FTP
2
SMB*
NetWare*
AppleTalk*
Bonjour (mDNS)*
E-Mail Alert
SNMP Agent
1
* The Ethernet settings are not displayed when the optional wireless printer adapter is installed.
2
* An optional multi protocol card is required to display these items.
Auto Detects Ethernet transmission rate and the duplex settings
automatically.
10Base-T Selects 10Base-T Half-Duplex as the default value.
Half-Duplex
10Base-T Selects 10Base-T Full-Duplex as the default value.
Full-Duplex
100Base-TX Selects 100Base-T Half-Duplex as the default value.
Half-Duplex
100Base-TX Selects 100Base-T Full-Duplex as the default value.
Full-Duplex
Displays the printer's MAC address.
Select the check box to enable the LPD.
Select the check box to enable the Port9100.
Select the check box to enable the IPP port.
Select the check box to enable the WSD port.
Select the check box to enable the FTP port.
Select the check box to enable the SMB.
You can also configure the transport protocol to be used.
TCP/IP and NetBEUI can be selected simultaneously as the
transport protocol.
2
Select the check box to enable the NetWare port. You can also
configure the transport protocol to be used. IPX/SPX and
TCP/IP can be selected simultaneously as the transport
protocol.
2
Select the check box to enable the AppleTalk port.
2
Select the check box to enable the Bonjour (mDNS) feature.
Select the check box to enable the E-Mail Alert feature.
Select the check box to enable the SNMP.
You can also configure the transport protocol to be used. UDP
and IPX can be selected simultaneously as the transport
protocol.
IPX is only available when the multi protocol card is installed.