Dell 5110cn - Color Laser Printer User Manual page 36

Authenticate Error Trap
IPsec Settings Protocol
IKE
IKE SA Lifetime
IPsec SA Lifetime
DH Group
PFS
Remote peers IPv4
address
Remote peers IPv6
address
Non IPsec communication
policy
IP Filter Access List
5
(IPv4)*
1
* The Ethernet settings are not displayed when the optional wireless printer adapter is installed.
2
* When you use wired LAN, Ethernet is displayed. When you use wireless LAN, Wireless LAN is displayed.
3
* An optional wireless printer adapter is required to display the Wireless settings.
4
* An optional multi protocol card is required to display these items.
5
* This item is only available for LPD or Port9100.
NetWare Setup Page
Purpose:
To verify the current settings of IPX/SPX and Netware. In this page, you can only verify the settings of items.
If you want to change the settings, go to the pages in the Print Server Settings tab.
Values:
Displays the status of the Authenticate Error Trap.
Displays the protocol status.
Displays to use a preshared key for IKE authentication.
Displays the lifetime for IKE SA.
Displays the lifetime for IPsec SA.
Displays the DH group.
Displays the PFS status.
Displays the IP address to connect to.
Displays the IP address to connect to.
Displays the status of the Non IPsec communication
policy feature.
Displays the list of IP addresses that are permitted or
denied access to the printer.