Dell 5110cn - Color Laser Printer User Manual page 272

viii. Click the Restart printer to apply new settings button.
4. Once printer wireless adapter is properly configured, you may use the typical network printer
installation method to complete driver installation.
5. To communicate with printer, you need to restore the previous wireless settings on your computer.
6. Restore the previous wireless settings for your computer.
NOTE: If your computer provides a wireless LAN adapter tool, change the wireless settings using this
tool. Or you can change the wireless settings using the tool provided by the operating system. See the
instructions below.
For Windows XP and Windows Server 2003:
a. Select Network Connections from Control Panel.
b. Right-click Wireless Network Connection and select Properties.
c. Select the Wireless Network tab.
d. Click the Advanced button.
e. Select Access point (Infrastructure) networks only and close the Advanced dialog box
(Applicable to printer with the wireless infrastructure mode).
f. Select the setting that you send to the printer in the list in the Preferred Network group
g. Click Move up to move the setting to the top of the list.
h. Click OK to close the Property dialog box.
NOTE: When your operating system is earlier than Windows 2000, create settings according to the
manual of the wireless setting tool provided by your wireless device manufacturer.
For Windows Vista:
a. Open Control Panel.
b. Select Network and Internet.
c. Select Network and Sharing Center.
d. Select Connect to a network.
e. Select the setting you send to the printer from the network items listed in Connect to a
network.
f. Select Connect Anyway in the warning dialog box indication indicating you are entering an
unsecured area.
g. Click Close in the dialog box after confirming the connection is a success.