Print And Check The Printer Settings Page; Assign An Ip Address - Dell 3010cn - Color Laser Printer Manual

1 Ethernet port
Turn On the Printer
1. Plug one end of the printer power cable into the socket at the back of the printer and the other end into a properly grounded outlet.
2. Turn on the computer and the printer.

Print and Check the Printer Settings Page

Print a Printer Settings page to verify the network connection. This page also provides important information that helps you configure for network printing.
1. Press Menu.
2. Press until Configure appears, and then press
3. Press until Reports appears, and then press
4. Printer Settings is displayed. Press
The Printer Settings page is printed.
5. If the IP address shows anything other than 0.0.0.0 (the factory default) or 169.254.xx.xx, the printer has an IP address assigned and stored. Go to
"Verify the IP Settings."

Assign an IP Address

An IP address is a unique number that consists of four sections that are delimited by a period and can include up to three digits in each section, for example,
111.222.33.44.
Assigning an IP address already in use can cause network performance issues.
NOTE: Assigning an IP address is considered as an advanced function and is normally done by a system administrator.
NOTE: Do not continue with this procedure until you have the following three addresses:
- IP Address
- Subnet Mask Address
- Gateway Address
For more information on using your operator panel, see
1. Turn on the printer.
or .
or .
.
"Operator Panel."