To help isolate the source of a print job problem. With Hex Dump selected, all data sent to the printer is
printed in hexadecimal and character representation. Control codes are not executed.
Values:
Disables the Hex Dump feature.
Disable*
Enables the Hex Dump feature.
Enable
Draft Mode
Purpose:
To save toner by printing in the draft mode. The print quality is reduced when printing in the draft mode.
Values:
Does not print in the draft mode.
Disable*
Prints in the draft mode.
Enable
Line Termination
Purpose:
To add the line termination commands.
Values:
The line termination command is not added.
Off*
CR=CR, LF=LF, FF=FF
The LF command is added.
Add-LF
CR=CR-LF, LF=LF, FF=FF
The CR command is added.
Add-CR
CR=CR, LF=CR-LF, FF=CR-FF
The CR and LF commands are added.
CR-XX
CR=CR-LF, LF=CR-LF, FF=CR-FF