1.
Press Menu.
2.
Press
until Admin Menu appears, and then press
3.
Press
until Panel Settings appears, and then press
4.
Panel Lock is displayed. Press
5.
Press
until Enable appears, and then press
6.
Press
.
7.
Press
until Change Password appears, and then press
8.
Enter the old password (when you enter it for the first time after doing the settings, enter 0000), and
then press
.
9.
Enter the new password, and then press
10.
Reenter the password to confirm the password that you entered, and then press
The password has been changed.
NOTE:
If you forget your password, turn off the printer. Then, while holding Menu, turn on the
printer. Continue to hold Menu until the display indicates Are you sure?. Release Menu and press
. Press
to select Yes, then press
recover the factory default panel password.
NOTE:
If panel lock is Enable, the factory-default panel password is 0000.
See also:
"Change
Password"
Disabling Panel Lock
1.
Press Menu.
2.
Press
until Admin Menu appears, and then press
3.
Press
until Panel Settings appears, and then press
4.
Panel Lock is displayed. Press
5.
Press
until Disable appears, and then press
or
or
.
.
.
. The display will briefly indicate Password reset. This will
or
or
.
.
.
or
.
or
.
.
or
.
.