Dell 5110cn - Color Laser Printer User Manual page 202

016-318
Restart Printer
Reseat Memory
Contact Support
016-340
Restart Printer
Contact Support
IfMessageReturns
016-330
Restart Printer
Reseat MPC
Contact Support
016-338
Restart Printer
Reseat Wireless
Contact Support
NNN-NNN
Restart Printer
Reseat XXX
Contact Support
Paper Jam
NNN-NNN
Open XXX
Remove Paper
Jam Fuser Exit
NNN-NNN
Open XXX
Remove Paper
Paper Jam
NNN-NNN
Open XXX
and YYY
Paper Jam
NNN-NNN
Open XXX
Open YYY
Paper Jam
077-101
Open Tray
Remove Paper
Open & Close
Front Latch
The additional memory
module is not fully
inserted into the slot.
A communication card
error occurred between
the network and control
card modules.
A communication card
error occurred between
the network interface
card and control card.
An error occurred in the
wireless printer adapter.
XXX is not fully inserted.
Error NNN-NNN relates
to printer problems.
The printer detects a
paper jam.
XXX and YYY indicates a
position that you open.
Error NNN-NNN relates
to printer problems.
The printer detects a
paper jam.
Remove the additional memory module from the slot,
and then reattach it firmly. If this does not solve the
problem, contact Dell.
See "Contacting Dell" in the Owner's Manual.
Turn off the printer, and then on. If this does not
solve the problem, contact Dell.
See "Contacting Dell" in the Owner's Manual.
Turn off the printer, and then on. If this does not
solve the problem, contact Dell.
See "Contacting Dell" in the Owner's Manual.
Turn the printer off, and then on. Ensure the
following:
· The wireless printer adapter is securely inserted into
the slot on the controller card.
· Unauthorized USB devices are not used.
If this does not solve the problem, contact Dell.
See "Contacting Dell" in the Owner's Manual.
Confirm that the unit is securely inserted. If this does
not solve the problem, contact Dell.
See "Contacting Dell" in the Owner's Manual.
Clear the paper path.
When "Reg Cover" appears in XXX, the procedure to
remove print media is different depending on whether
the Duplexer is attached or not.
See "Clearing Jams"
Pull out the specified tray and clear the paper path.
See "Clearing Jams"