Assign An Ip Address - Dell S2500 Owner's Manual

Assign an IP address

Recommended method
If the printer is connected to a network which automatically supplies IP addresses (DHCP),
you do not need to use the Print Server TCP/IP Setup Utility available on the Drivers and
Utilities CD. Use the Dell Printer Configuration Web Tool to make printer configuration
changes. See "Dell Printer Configuration Web Tool" on page 59 for more information.
Alternate method
The Print Server TCP/IP Setup Utility is not available on the computer hard drive unless
the printer drivers and applications have been installed from the Drivers and Utilities CD. If
they have not been installed, you can run the TCP/IP utility directly from the CD.
The utility must be run from a computer attached to the same Subnet as the printer.
To run the utility:
When the Ready/Data light on the printer is on, press and release Continue to print a
1
menu settings page and a network setup page.
Launch the Drivers and Utilities CD: click Start
2
example, type D:\ where D is the drive letter of your CD-ROM drive).
If your computer
uses this language
English
French
German
Italian
Spanish
Double-click GUIcfgutil.exe to run the program.
3
6 2 Sett ing up f o r net work printi ng
Select the file from the list
(Replace the D:\ in the table with the letter of your
CD-ROM drive)
D:\TCPIPSETUPUTILITY\ENGLISH\GUICFGUTIL.EXE
D:\TCPIPSETUPUTILITY\FRENCH\GUICFGUTIL.EXE
D:\TCPIPSETUPUTILITY\GERMAN\GUICFGUTIL.EXE
D:\TCPIPSETUPUTILITY\ITALIAN\GUICFGUTIL.EXE
D:\TCPIPSETUPUTILITY\SPANISH\GUICFGUTIL.EXE
Run and browse your CD drive (for